Description
Bewades Blue
Ultraviolet disinfection for apartment or landed houses
Bewades® Blue is designed for the disinfection of deep well water and city water for apartments and landed houses. Protect your family members against disease-causing pathogens with a compact ultraviolet disinfection system. The UV is monitored by a UVC sensor and kills 99% of disease-causing microorganisms.
MADE IN GERMANY
This range is suited for
-
People with sensitive skin
-
Families with young babies and elderly
-
People who do not wish to use chemical for disinfection
-
People who would like their entire house's apartment to be bacteria and virus-free
Product Features
-
Remove 99% of bacteria and viruses in your water
-
Effective Chemical-free disinfection of water for entire home
-
Low maintenance and only need to replace UV lamp once every 365 days - Monitor your water with BWT LCD Screen on Controller on UV unit
The Bewades® Blue systems are available in 5 different models and sizes
-
BWT Bewades® Blue 0.5: max. flow rate at 95% UVT - 0.5 m³/h*
-
BWT Bewades® Blue 1.0: max. flow rate at 95% UVT - 1 m³/h*
-
BWT Bewades® Blue 2.0: max. flow rate at 95% UVT - 2 m³/h*
-
BWT Bewades® Blue 2.5: max. flow rate at 95% UVT - 2.5 m³/h*
-
BWT Bewades® Blue 3.5: max. flow rate at 95% UVT - 3.5 m³/h*
*Data with 70% transmission/10cm and a dosage of 40 mJ/cm²
Hygienically perfect drinking water through BWT cutting-edge technology
- intuitive operation via color display with plain text message
- very robust online sensor (optional), which permanently monitors the system performance and alerts if the water is of hygienic concern
- high-quality stainless steel reactor, very hygienic and corrosion-resistant
- reliable, robust UV lamp for longevity (lifetime 9,000 hours)
- electronic control in a splash-proof housing
- Complete set - ready for installation, including wall bracket
product description
With BWT BEWADES ® blue you can ensure your drinking water hygiene. A 254 nm Teflon®-based UV sensor is available as an option, which continuously monitors the performance of the UV system and displays it on a color screen. In addition to the UV power display, information on diagnostics, system status and warnings is also shown. With the integrated expansion port, adding a 4-20 mA output or a remote alarm is a simple plug & play option! Various system types available for various applications.
Water Quality Parameters
UV disinfection is extremely effective against microorganisms but only if the UV light can pass through the water it needs to treat. This means that the quality of your water is very important in order to ensure complete disinfection. Treated water should be tested for at the least the parameters listed below. If the water exceeds the listed parameters BWT strongly recommends that appropriate pretreatment equipment be installed (equipment required will depend on parameters being treated):
| Hardness | < Hardness should be below 1,5 mmol/l otherwise the quartz sleeve must be cleaned periodically in order to ensure efficient UV penetration. |
| Iron (Fe) + Manganese | The sum should be below 0,1 ppm |
| Turbidity | < 1 NTU |
| UVT (transmittance) | > 85 %/100 mm (Please contact BWT if water has a UVT that is less than 80 %/100 mm for pretreatment recommendations) |
You can have your water tested at a private analytical laboratory or by your local dealer. It is always recommended to install pre-filtration of at least 5 microns prior to a BWT UV disinfection system.
