PERMAQ® PICO VARIO

PERFECTLY PURE WATER INSTALLATION

Designed for a direct connection to one or several point-of-use.

• Real tankless reverse osmosis

This online model is equipped with an integrated frequency controller and pressure gauge, which gives users the desired flow rates at a fixed set pressure.

• Highest hygiene

Full-fit membrane modules have no “dead zone“ areas where water stagnates and biofouling occurs -> 100% full flow

• Easy installation

NO pressure tank is required

• Fields of applications

Permaq Pico is useful for climatization, cooling water, lab-water, laundries, dishwashers, steam installations, air humidifiers, laboratories and process water of all kinds.

PERMAQ PICO VARIO		40	50	60
Connection width	DN	20/25	20/25	20/25
Permeate output	m³/h	0.15–0.45	0.25–0.9	0.3–1.25
WCF	%	75-80	75-80	75-80
Salt retention rate	%	>98.5	>98.5	>98.5
Order no.		13238	13240	13242
Order no. HR version		13239	13241	13243
BWT PERMAQ® Pico Vario Dimensions	Type	40 / 40 HR	50 / 50 HR	60 / 60 HR
Width x Depth	mm	400 x 510	400 x 670	400 x 670
Height	mm	1500	1500	1500
Operating weight, approx.	kg	115	140	150

What means high rejection (HR)?

▪ Improved salt rejection >99% accompagnied by reduced flow rate
▪ Solution for high TDS feed water
▪ Solution for applications, which requires low permeate conductivity

BWT PERMAQ Pico 40-90 Vario

▪ Direct-connect - real online solution without membrane pressure tank
▪ Incl. booster pump
▪ Modulating permeate flow rate 60 – 2,050 l/h
▪ Constant permeate delivery pressure during consumption
▪ Adjustable permeate pressure between 3.0 and 7.0bar
▪ Different RO membrane types

▪ Full-fit-RO
▪ Hygiene- and Interval flush
▪ Dead zone reduced multi-block-connection
technology
▪ Ultra-compact unit with stainless steel frame and coated housing

▪ Remote data access with optional BUS-
communication module (Ethernet, Profinet, ...)

Important points

▪ Feed TDS < 1’000mg/l
▪ Total iron & manganese concentration < 0.1mg/l
▪ Oxidysing agents/Total chlorine < 0.05mg/l
▪ SDI < 3.0 %/min
▪ Hardness 0°dH (with AS dosing < 25°dH)
▪ Silicate
▪ Recovery resp. WCF influences the concentration factor
▪ Do the feed water specifications deviate from the tolerable values (product data sheet)? If yes, a technical design review, based on a water analysis is required.

Downloads

BWT PERMAQ® PICO Vario Data sheet

Installation and Operating Manual EN | BWT Permaq Pico and Permaq Pico Vario